main.ino
Arduino (C++) · 32 lines
#include <WiFi.h>
#include <WebServer.h>
// Replace these with your Wi-Fi network credentials
const char* ssid = "xxx";
const char* password = "xxx";
WebServer server(80); // HTTP server on port 80
void handleRoot() {
server.send(200, "text/plain", "Hello world");
}
void setup() {
Serial.begin(115200);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
}
// Configure the only route: "/"
server.on("/", handleRoot);
server.begin();
}
void loop() {
server.handleClient();
}